Welded Mesh Designer
Design your welded mesh grid and estimate weight. Cyan dots = weld points.
How to use this tool
Per sheet vs. per m²: "Est. Weight" is the total weight of ONE sheet/roll at the Length × Width you enter below. "Weight / m²" beside it is the same mesh per square metre - use it to price by area.
Rectangular openings: Aperture X (horizontal) and Y (vertical) can differ, e.g. 100 × 50 mm - set them independently.
Different line & cross wires? Enter an optional cross-wire ⌀; leave blank to use the same wire both ways.
Est. Weight
Fill dimensions
whole sheet / roll
Weight / m²
-
per square metre
Total Coverage
-
total area covered
Pitch X × Y
52.00 × 52.00 mm
aperture + wire ⌀
Live Preview
Reference - Welded Mesh Terminology